AVN-AIO8 8 Input, 8 Output Dante® Interface, PoE
The AVN-AIO8 audio converter and interface converts up to eight analogue inputs and eight analogue outputs to and from the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
- 8 x balanced analogue inputs on XLR.
- 8 x balanced analogue outputs on XLR.
- Adjustable global 0dBFS line up selection (+12dBu/+18dBu/+24dBu).
- 1 x RJ45 Dante connector (1Gb/s Ethernet Port).
- PoE, Link, and Clock LED status indicators.
- Configuration using Dante Controller.
- AES67 operation & Dante Domain Manager compliant.
- Powered by PoE.
- 1U 19” rack-mount form factor.
(The AVN-AIO8R is available with dual redundant Ethernet ports).
More at: https://www.sonifex.co.uk/avn/avn-aio8.shtml
Product Specs
Network and AoIP
AoIP Standard: Dante
Number of Channels: 8 receive, 8 transmit
Number of Streams:8 receive, 8 transmit
Sample Rates: 44.1kHz, 48 kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz
Format: Linear PCM, 16, 24 or 32 bit
AES67 Support: Yes
Connectivity: 1 x RJ45
Speed: 1Gbps or 100Mbps
Dante Domain Manager Ready:Yes
Audio Input Performance Specifications
Parameter Line Input
Input Impedance: >20kΩ balanced
0dBFS line-up: User Selectable +12dBu/+18dBu/+24dBu balanced
Frequency Response: 20Hz to 20kHz, +0/-0.2dB
THD+N: <-110dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW
Noise: -110dBFS, 20kHz BW, Rs=200Ω
Crosstalk:<-100 dB
Common Mode Rejection: >60dB @ 1kHz
Audio Output Performance Specifications
Parameter Line Output
Output Impedance: <50Ω balanced
0dBFS line-up: User Selectable +12dBu/+18dBu/+24dBu balanced
Frequency Response: 20Hz to 20kHz, +0/-0.5dB
THD+N: <-107dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW
Noise (Mic=EIN): -107dBFS, 20kHz BW
Crosstalk:<100dB
Balanced Line Input XLR Pinout
PinFunction
1Chassis Ground/Screen
2Input Phase/Positive
3Input Non-Phase/Negative
Balanced Line Output XLR Pinout
PinFunction
1Chassis Ground/Screen
2Output Phase/Positive
3Output Non-Phase/Negative
PoE Power
Standard: 802.3at Type 1
Class: 0
PD Power Range: 0.44 W to 12.94 W
Typical PSE Power Usage: 6.5 W
Max PSE Power Usage: 15.4 W
Equipment Type
AVN-AIO8: 8 Input, 8 Input, 8 Output Dante® Interface, PoE
Physical Specification
Dimensions (Raw): 48cm (W) x 11cm (D) x 4.3cm (H)(1U)
19” (W) x 4.3” (D) x 1.7” (H)
Weight: Nett: 1.1kg Gross: 1.6kg
Nett: 2.4lbs Gross: 3.5lbs
Learn more